CRDL-2A
CRDL-2A

ICP Contract Required Detection Limit Standard 2A, 125 mL

ICP Contract Required Detection Limit Standard 2A in 10% HNO3, 125 mL

$240.00

PART #: CRDL-2A

Availability: In Stock

Product Information

Part # :CRDL-2A

Matrix :10% HNO3

Volume :125 mL

Units/Pack :1

Expiration : 365 Days / 12 Months

Storage Condition :Ambient

Hazardous Info :

Product Shipping
Hazardous Hazardous

This item has been deemed as hazardous.

Additional Hazardous shipping fees may apply.

CLP Standards for ICP & ICP-MS Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2. The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability. US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections: • Exhibit C, Inorganic Target Analyte List (TAL) • Exhibit D, Analytical Methods • Exhibit E, QA/QC Requirements CLP ISM 01.2 & ILM 05.3 Standards for ICP For ILM 05.3, a standard must be run at the Contract Required Detection Limits (CRDL). To verify linearity near the CRQL, this standard is analyzed at the beginning of the analysis run, after the ICV/ICB and before the ICSA and ICSAB. In addition, this standard must be run at a frequency of not less than 20 analytical samples and at the end of the analysis run, followed by the ICSA/ISCAB. The sequence order is CCV, CCB, CRI, ICSA, ICSAB, CCV, and CCB. For ISM 01.2, at least one of your calibration standards must be at the Contract Required Detection Limit (CRDL). This standard, when diluted, can be used as a calibration standard to fulfill this requirement.

Component Concentration Matrix CAS#
Calcium 5,000 µg/mL 10% HNO3
Magnesium 5,000 µg/mL 10% HNO3
Potassium 5,000 µg/mL 10% HNO3
Sodium 5,000 µg/mL 10% HNO3
Aluminum 200 µg/mL 10% HNO3
Barium 200 µg/mL 10% HNO3

Safety Data Sheet

pdf Download