INT-B3
INT-B3

ICP Analytes B3 in 5% HNO3/tr. Tartaric Acid/tr. HF, 125 mL

$275.00

PART #: INT-B3

Product Information

Part # :INT-B3

Study Number :

Matrix :5% HNO3/tr. Tartaric Acid/tr. HF

Volume : 125 mL

Units/Pack :1

Expiration : 365 Days / 12 Months

Storage Condition :Ambient

Hazardous Info :

Product Shipping
Hazardous Hazardous

This item has been deemed as hazardous.

Additional Hazardous shipping fees may apply.

CLP Standards for ICP & ICP-MS Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2. The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability. US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections: • Exhibit C, Inorganic Target Analyte List (TAL) • Exhibit D, Analytical Methods • Exhibit E, QA/QC Requirements CLP ISM 01.2 and ILM 05.2 & 05.3 Standards for ICP For verification of inter-element and background correction factors at the beginning and the end of each analysis run. In addition, a verification must be done after every 20th sample. Two solutions are required for the most common interference check: Solution A, the interferents alone (INT-A1) and Solution AB, a combination of interferents (INT-A1) and analytes (INT-B3). Solution A is prepared by diluting INT-A1 20-fold. Solution AB is prepared by diluting INT-A1 20-fold and INT-B3 100-fold; for example, 5 mL of INT-A1 and 1 mL of INT-B3 into a 100 mL volumetric flask, brought to volume with a matrix blank. Once prepared, the solutions should be analyzed consecutively, starting with Solution A.

Component Concentration Matrix CAS#
Cadmium 100 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Nickel 100 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Zinc 100 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Antimony 60 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Barium 50 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Beryllium 50 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Chromium 50 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Cobalt 50 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Copper 50 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Manganese 50 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Vanadium 50 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Silver 20 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Arsenic 10 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Thallium 10 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Lead 5 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
Selenium 5 µg/mL 5% HNO3/tr. Tartaric Acid/tr. HF
SDS-update icon

Safety Data Sheet

pdf Download